Change of plans with the #Cerritos. Putting masking tape on for the windows around the saucer edge was a PITA, so I just drilled them out instead. It’s not accurate, but should look okay at a certain distance. #StarTrek #StarTrekModels #SciFiModels #Federation #Starship #ScaleModels #ShipsOfStarTrek #StarTrekLowerDecks #MKMModelwerx
Posts
-
Change of plans with the #Cerritos. -
Clear parts and other areas have been masked.Clear parts and other areas have been masked. Now ready for paint. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Milliput sanded.Milliput sanded. Next I need to mask off the clear parts (and areas that don’t have clear parts in place yet) to get it ready for paint. I’ll probably start masking off windows on the #Cerritos model at the same time so it’ll be ready for paint too. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Gap/seam filling on the warp nacelles with milliput.Gap/seam filling on the warp nacelles with milliput. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Enterprise ready for launch.Enterprise ready for launch. Powered up. 2/2 #StarTrek #StarTrekModels #GalaxyClass #USSEnterprise #Enterprise #Starfleet #Federation #Starship #MKMModelwerx -
Enterprise ready for launch.Enterprise ready for launch. 1/2 #StarTrek #StarTrekModels #GalaxyClass #USSEnterprise #Enterprise #Starfleet #Federation #Starship #MKMModelwerx -
Hello Enterprise!Hello Enterprise! New decals are now in place. I’ll now leave them overnight and tomorrow get a clear matt coat applied. #StarTrek #StarTrekModels #GalaxyClass #USSEnterprise #Enterprise #Starfleet #Federation #Starship #MKMModelwerx -
Horizon no more!Horizon no more! Name and registry decals have been removed. Next I need to regloss the model for the new decals. #StarTrek #StarTrekModels #GalaxyClass #USSHorizon #Horizon #USSEnterprise #Enterprise #Starfleet #Federation #Starship #1400Scale #ScaleModels #ModelBuilder #MKMModelwerx -
Last night I noticed that one of the orange LEDs in the port nacelle wasn’t working, so I had to open it up, replace the bulb and close it back up.Last night I noticed that one of the orange LEDs in the port nacelle wasn’t working, so I had to open it up, replace the bulb and close it back up. Now I’m just waiting for the glue to set again. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Bringing USS Horizon into dry dock for a name change before shipping her to her new home.@bitsmasher thank you! -
Bringing USS Horizon into dry dock for a name change before shipping her to her new home.Bringing USS Horizon into dry dock for a name change before shipping her to her new home. #StarTrek #StarTrekModels #GalaxyClass #USSHorizon #Horizon #USSEnterprise #Enterprise #Starfleet #Federation #Starship #1400Scale #ScaleModels #ModelBuilder #MKMModelwerx -
I’ve applied epoxy glue to the nacelles, then used masking tape and clamps to hold them together.I’ve applied epoxy glue to the nacelles, then used masking tape and clamps to hold them together. I’ll leave them for 24 hours to let the glue properly set. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
The blue LEDs finally arrived, so I got them wired up and glued into place.The blue LEDs finally arrived, so I got them wired up and glued into place. I then glued both halves of the main body together. #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx -
Light test.#StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Allergies have been bad the last couple of days, but it finally eased long enough today for me to glue the inboard nacelles to each pylon and wire up all the cables.Allergies have been bad the last couple of days, but it finally eased long enough today for me to glue the inboard nacelles to each pylon and wire up all the cables. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
LEDs are now in place in the Starboard warp nacelles, ready to be glued to its pylon and wired up to the rest of the ship.LEDs are now in place in the Starboard warp nacelle, ready to be glued to its pylon and wired up to the rest of the ship. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Finished painting the inside of the nacelles with a coat of silver.Finished painting the inside of the nacelles with a coat of silver. Once dried, I wired up the Bussard’s orange LEDs and white strobe. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Saucer edge milliput sanded and saucer wired up and glued into place.Saucer edge milliput sanded and saucer wired up and glued into place. More milliput applied and finally began internal light blocking the nacelles. #StarTrek #StarTrekModels #SciFiModels #DuderstadtClass #Federation #Starship #ScaleModels #ShipsOfStarTrek #MKMModelwerx -
Got most of the LEDs wired up in the main body of the #Venator, I didn’t have enough blue LEDs to do the engines (I ordered more a few days ago, hopefully they will arrive tomorrow). -
Got most of the LEDs wired up in the main body of the #Venator, I didn’t have enough blue LEDs to do the engines (I ordered more a few days ago, hopefully they will arrive tomorrow).Got most of the LEDs wired up in the main body of the #Venator, I didn’t have enough blue LEDs to do the engines (I ordered more a few days ago, hopefully they will arrive tomorrow). #StarWars #StarWarsModels #SciFiModels #Venator #Republic #StarDestroyer #ScaleModels #ModelBuilder #MKMModelwerx
